12 CH AC110V 120V 220V RF Remote Controller, Radio Control Switch For Door Light Winch

1.500M of control distance 2.4 Control Modes 3.Easy use for Light,Motor,Fan,Gate,Door,Lock, Window, Blind, Banne, Winch, Bell

Feature:

Wireless control, easy to install. Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, Electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V. You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/ several transmitters can control one/ several receivers simultaneously. If you use two or more sets in same place, you can set them with different codes. Transmitting Frequency: 315MHz / 433MHz.

Receiver:

Model No.: S2H-AC110 / S2H-AC220 / S2H-AC110/220 Channel: 2 CH Control Modes: Latched, Momentary, Toggle, Toggle + Momentary Coding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): AC100~110V (S2H-AC110), AC200~240V (S2H-AC220), AC110~240V (S2H-AC110/220)Working Voltage Range of Relay: AC110~240V or DC0~28V PCB size: 74mm x 52mm x 20mm Case size: 80mm x 57mm x 35mm Maximum Working Current: 5A / each channel

Transmitter:

Model No.: CV-12 Channel: 12 CH Remote Control Distance: 500m / 1500ft (theoretically) Encode: Fixed code by soldering Unit size: 110mm x 50mm x 18mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Button 1~12 of the transmitter is corresponding to the relays 1~12 of the receiver.

Setting control mode Latched: press button 1 of the transmitter.relay 1 ~ 4 are interlocked; relay 5 ~ 8 are interlocked; relay 9 ~ 12 are interlocked.Control mode Latched (relay 1~12): Press -> On; Press other button -> Off.Setting control mode Momentary: press button 2 of the transmitter.Control mode Momentary (relay 1~12): Press and hold -> On; Release -> Off.Setting control mode Toggle:press button 4 of the transmitter.Control mode Toggle (relay 1~12): Press -> On; Press again -> Off.Setting control mode Momentary + Toggle: press button 8 of the transmitter.Control mode Momentary (relay 1~6): Press and hold -> On; Release -> Off.Control mode Toggle (relay 7~12): Press -> On; Press again -> Off.