6 CH AC110v 120v 220v RF Transmitter And Receiver Remote Control Switch, Wireless Relay Controller Switch

1.500M of control distance 2.3 Control Modes 3.Easy use for Light,Motor,Fan,Gate,Door,Lock, Window, Blind, Banne, Winch, Bell

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC 110~240V or DC 0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S1UB-AC110 / S1UB-AC220Channel: 1 CHControl Modes: Toggle, Momentary, LatchedCoding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): AC100~240V (S1UB-AC110), AC110~240V (S1UB-AC220)Working Voltage Range of Relay: AC 110~240V or DC 0~28VPCB size: 74mm x 52mm x 24mmCase size: 79mm x 58mm x 35mmMaximum Working Current: 10A

Transmitter:

Model No.: CV-6Channel: 6 CHRemote Control Distance: 500m / 1500ft (theoretically)Encode: Fixed code by solderingUnit size: 110mm x 50mm x 18mmPower Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Setting control mode Toggle: Only connect Jumper-2.Control mode Toggle: Press -> On; Press again -> Off.Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Press button 6 again: Turn off Receiver 6 (disconnect B and C, connect A and B)Setting control mode Momentary: Only connect Jumper-1.Control mode Momentary: Press and hold -> On; Release -> Off.Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press and hold button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Release button 6: Turn off Receiver 6 (disconnect B and C, connect A and B)Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.Control mode Latched: Press -> On, another relay Off; Press another button -> Off.Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Press other button: Turn off Receiver 6 (disconnect B and C, connect A and B)

Package Include:

6 x Receiver: S1UB-AC110 / S1UB-AC220 (1 Channel / Three Control Modes)1 x Transmitter: CV-61 x User manual