1 Channel Toggle Locked Control Mode DC9V 12V 24V Door Alarm Light Motor Wireless Remote Control Switch Transmitter and Receiver

1. 100m control distance 2. Locked control mode 3. 2 remotes with key ring 4. receiver with external antenna 5. dc powered

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting frequency: 315MHz / 433MHz

Receiver:

Model No.: S1T-DC09-ANT1 / S1T-DC12-ANT1 / S1T-DC24-ANT1Channel: 1 CHControl Mode: Toggle (Press -> On; Press again -> Off)Coding Type: Fixed codeCoding Setting: By solderingPower Supply (Operating Voltage): DC12V±1V (S1T-DC12-ANT1), DC9V±1V (S1T-DC09-ANT1), DC24V±1V (S1T-DC24-ANT1)Working Voltage Range of Relay: AC110~240V or DC0~28VPCB size: 70mm x 48mm x 21mmCase size: 75mm x 55mm x 28mmMaximum Working Current: 10ALength of External Telescopic Antenna: 80mm / 305mm (stretch)The receiver has farther working range with external telescopic antenna!

Transmitter:

Model No.: CWB-1Channel: 1 CH Remote Control Distance: 50m / 150ft (theoretically) Encode: Fixed code by Soldering Unit size: 56mm x 32mm x 12mm Power Supply: 2 x 3V button cell batteries (Included, can be used for 12 months)

Usage:

Initial state: A, B = Normally Closed; B, C = Normally Open.1) Press button: Turn on relay (connect B and C, disconnect A and B)2) Press button again: Turn off relay (disconnect B and C, connect A and B)

Package Include:

1 x Receiver: S1T-DC09-ANT1 / S1T-DC12-ANT1 / S1T-DC24-ANT1 (1 Channel / Toggle Control Mode)2 x Transmitter: CWB-11 x User manual