6 Channel AC 110 240V 2000M Long Range RF Wireless Remote Control Switch for Garden Lights Street Light Sign Board Light

1. Wireless safe operation 2. 2000m Long distance 3. used for 6 lights at least 4. One remote easy control 5. Widely used

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Use ULN2003 to drive relay, with strong anti-interference.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 315MHz / 433MHzWorking distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:

Model No.: S6C-AC220-ANT2 Channel: 6 CH6 Control Modes: Latched, Momentary, Toggle, Momentary + Toggle, Momentary + LatchedCoding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): AC100~240V Working Voltage Range of Relay: AC110~240V or DC0~28VPCB Size: 94mm x 73mm x 20mmCase Size: 100mm x 80mm x 30mmStatic Current: ≤6mAMaximum Working Current: 10A / each channel

External Extend Antenna:

Frequency Range: 300~450MHzImpedance: 50ΩAntenna Length: 15cmCable Length: 150cmWeight: 35gAnti-interference, waterproof, shielded wire set insideMagnetic stand design for easy to install

 

Transmitter:

Model No.: CB-6Channel: 6 CHRemote Control Distance: 1000m / 3000ft (theoretically)Encode: Fixed code by solderingUnit Size: 135mm x 42mm x 25mmPower Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Usage:

1) Learning Toggle control mode: When the receiver is in the status of LEARNING, press button 1 of the remote control.Control mode Toggle (Channel 1~6): Press -> On; Press again -> Off.Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)Press button 1 again: Turn off relay 1 (disconnect B and C, connect A and B)…Press button 6: Turn on relay 6 (connect B and C, disconnect A and B)Press button 6 again: Turn off relay 6 (disconnect B and C, connect A and B)2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button 2 of the remote control.Control mode Momentary (Channel 1~6): Press and hold -> On; Release -> Off.Press and hold button 1: Turn on relay 1 (connect B and C, disconnect A and B)Release button 1: Turn off relay 1 (disconnect B and C, connect A and B)…Press and hold button 6: Turn on relay 6 (connect B and C, disconnect A and B)Release button 6: Turn off relay 6 (disconnect B and C, connect A and B)3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button 3 of the remote control.Control mode Latched (Channel 1~8): Press -> On, other relays Off; Press other button -> Off.Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)Turn off other relay (disconnect B and C, connect A and B)…Press button 6: Turn on relay 6 (connect B and C, disconnect A and B)Turn off other relay (disconnect B and C, connect A and B)4) Learning Momentary (Channel 1~3) + Toggle (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button 4 of the remote control.5) Learning Momentary (Channel 1~3) + Latched (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button 5 of the remote control.6) Learning Toggle control mode (Channel 1~4) + All On / Off (Channel 5/6): When the receiver is in the status of LEARNING, press button 6 of the remote control. Press button 5: Turn on all 6 relaysPress button 6: Turn off all 6 relays